© 2019 VPInstruments | MAN-VP-SPRO-EN | Revision: 1901 | Date: 04-07-2019
7
3
Product overview
The VPFlowScope probe measures mass flow, temperature and pressure simultaneously. All these
parameters are key to proper compressed gas measurement and are therefore included in all
models. With the insertion probe you are flexible in pipe diameter. All data can be accessed by
Modbus RTU, 4 .. 20 mA and pulse.
The VPFlowScope probe is available in three configurations to fit every application. Use the
connector cap for sensor features only, ideal for integration into a central management system. Use
the display module for central read out and data logging. Use the VPFlowTerminal for central read out
and data logging on location where a standard display can not be read out. For all models, all
parameters and outputs are available.
The VPFlowScope probe is available in 2 lengths. Additional options are available for both types:
Order Code
Flow range
Option
Length
Option
Display
VPS.R150
150 m
n
/sec
P300
300 mm length
D0
No display, No connector
cap
P400
400 mm length
D10
Display
P600
600 mm length
D11
D 2M point logger
D2
Connector cap
Order the VPFlowScope KIT to receive the complete start kit with all required accessories, everything
you need to get started right away.
3.1
Configuration
The instrument needs only one step to be ready for operation. It needs to know the exact inner pipe
diameter for accurate measurement, wrong inner diameter will lead to very significant errors. The pipe
diameter can be programmed with the keypad on the display module or with the VPStudio
configuration software. This software suite is also used for configuration of the outputs and data
logger. This software can be downloaded from our website.