VP instruments VPFlowScope, User Manual, Page: 20 / 36

© 2019 VPInstruments | MAN-VP-SPRO-EN | Revision: 1901 | Date: 04-07-2019
20
7 Display
The display provide some additional features:
·
LCD display with 3 rows of real time data, refreshed every second
·
Key pad with menu to configure the main settings
·
Data logger with adjustable logging intervals (option)
·
5 custom units (multiply an existing unit with a factor and show it on the LCD display).
Configuration can be done with VPStudio.
By default, the display will show 3 rows of measurement data in the factory default units: m
n
/sec,
deg C and bar (g). The menu can be entered to change the configuration. See section menu for all
configuration options.
The VPFlowScope display can be powered up without a sensor being connected. In this case a "no
sensor" message will be shown when the device. Always connect a sensor to ensure proper
operation.
7.1 Display status icons
Some status icons show feedback on the meters' status. Below is a list with explanation
Icons Description
Sensor module is properly connected and supplied with power
No communication with the sensor [Check external power when disconnected]
A blinking dot will indicate that a data session is active
2 rotating arrows indicate that there is communication with the computer
The display is locked. The menu can not be accessed
Memory indication. Each block indicates 20% of memory usage. The blocks start to
blink if the memory is more then 95% full
7.2 LCD display
The LCD display provides 3 rows for real time data. Each row can be configured in the display menu
by selecting the desired parameter for this row.
Available options are listed in
menu -> display .