Voxx Electronics HR8MA1, Owner'S Manual

Page: 13 / 32

13
8” MONITOR ReaR SeaT VIdeO HeadReST SySTeM Owner’s Manual
HR8M
a
1
3. use the UP , DOWN, LEFT and RIGHT
direction buttons to select the best
channel/frequency from a five page list
of one hundred frequencies then press
the HOME / MENU SELECT button to
enter selection.
4. When a channel/frequency is selected,
the Wireless FM Modulator screen will
display the selected channel/frequency.
NOTe: The WFMM menu is only
available on the “M1” monitor.
Wireless fM Modulator (WfMM)
Channel Select from the Remote
Control:
1. select “M1” on the remote Control.
2. Press the
SySTEM MENU or PIX button to
enter SySTEM MENU.
3. use the
UP
and
DOWN
direction
buttons to select WFMM (Wireless FM
Modulator) and press the ENTER button
to enter the Wireless FM Modulator
sub-menu.
4. use the UP , DOWN, LEFT and RIGHT
direction buttons to select the best
channel/frequency from a five page list
of one hundred frequencies then press
the ENTER button to enter selection.
NOTe:
When a channel/frequency is
selected, the Wireless FM Modulator
screen will display the selected channel/
frequency.
WIReleSS fM MODulATOR ON/
Off Direct Access button on the
Remote Control:
Press the FMM ON or OFF button on the
remote Control (Figure 10) to turn the
Wireless FM Modulator On or OFF.
When
ON
is selected, the channel/frequency
the system is set to will be displayed on the
lower left-side of the main screen. When
OFF
is selected, FMM OFF will be displayed on
the lower left-side of the main screen.
lANguAge
lANguAge from the front panel:
1. Press and hold the HOME/ MENU SELECT
button on the front panel of the unit to
show the SySTEM MENU .
2. use the
UP
and
DOWN
direction buttons
to highlight Language and press the
HOME / MENU SELECT
button to enter the
sub-menu.
3. use the UP and DOWN direction buttons
to select the desired language then press
the HOME / MENU SELECT button to
save the setting.
lANguAge from the Remote Control
1. select “M1” or “M2” on the remote
Control.
2. Press the
SySTEM MENU
or
PIX
button to
enter SySTEM MENU.
3. use the UP and DOWN direction buttons
to highlight Language and press the
ENTER button on the remote Control to
enter the language
sub-menu.
4. use the
UP
and
DOWN
direction buttons
to select the desired language then
press the
ENTER
button on the remote
Control to save the setting.
HR8MA1 SySTeM SeTup Sub-MeNuS (continued)
figure 11
language Menu
figure 10
fMM ON/Off
buTTON