42
ENGLISH
OPERATIONS
How to Adjust the Pitch
•
Pitch Slider
With your fi rst deck playing and your second deck cued, start playback in sync with the downbeat of the song .
Quickly adjust the pitch using the PITCH SLIDER
8
to match the tempo of deck one. Moving the slider up (-) will
decrease the tempo, while moving it down (+) will increase the tempo.
•
Pitch Bending
Use Pitch Bend Button
9
As you are fi nding the right tempo, the track position will drift until it is fi ne-tuned and the tempo is matched.
Pitch Bending provides a quick fi x to keep the position as close as possible to deck one. Pressing the PITCH
BEND – or PITCH BEND + buttons will decrease or increase the speed of playback temporarily. The extent to
which the speed is changed is proportionate to the amount of time the button is pressed. For example, if the
PITCH BEND + button is held in continuously, the speed continues to increase until the maximum limit set by the
PITCH RANGE is reached. Once the PITCH BEND + button is released the pitch will return to the pitch set by the
PITCH SLIDER.
Use Jog Wheel
The jog wheel can also be used to temporarily bend the pitch of the music during normal playback. During
playback rotate the wheel clockwise to speed up and counterclockwise to slow down. The speed that you rotate
the jog wheel determines the percent of pitch bend.
•
Key Lock
This function allows the tempo or BPM of the music to be altered without affecting the musical key. While this
KEY LOCK LED is illuminated, the key will be locked at zero.
How to Set a Seamless Loop
•
Creating a Seamless Loop
Step 1 :
Press the PLAY/PAUSE button
16
to begin playback. The button illuminates solid green (not fl ashing).
Step 2 :
Set the start point of the seamless loop by pressing
the CUE button
19
at the desired point in pause
mode.
Step 3 :
Set the out point of the loop by pressing the OUT button
20
at the desired point in time. Playback will
immediately return to the previously set IN point and play to the OUT point, creating a seamless loop
without interruption. When the loop has been set, the LOOP indicator on the LCD screen will light. In
the same time, the
CUE and OUT button
are fl ashing.
•
To Exit the Loop
During loop playback, press the RELOOP/EXIT button
20
to exit the loop. When the music reaches the OUT
point, it will play through it instead of looping back to the IN point.
•
To replay a seamless loop (Reloop)
To replay the loop, press the RELOOP/EXIT button
19
. The loop can be re-triggered by pressing the button (until
a new loop is created). Press the RELOOP/EXIT button to exit the loop again.
MCU-20A(P40) 090516 Rev..indd 章節2:42
MCU-20A(P40) 090516 Rev..indd 章節2:42
2016/9/6 上午 11:06:12
2016/9/6 上午 11:06:12
