34
ENGLISH
PART NAMES AND FUNCTIONS
17.
STOP/RECORD button
Press this button to start or to stop RECORD function. When recording the LED will fl ash which recording device
is activated. The recorded fi les will be saved as REC xxxxx.mp3 in the USB driver REC. directory.
18.
MARK button
It will be saved in a fi le when press MARK BUTTON during recording. And then go on record in another new fi le.
19. CUE button
A Cue Point is self-defi ned starting point, usually at the beginning of a beat. Pressing the cue button during
playback immediately pause playback and returns the tracks to the last set cue point. By pressing and holding
the Cue Button you will return to Play mode until you release the button again. The player will then returns to the
Cue Point and go into Pause mode.
To set a new Cue point, pressing the pause button when you fi nd a favorite point during playback, the Cue LED
will fl ash; use Jog wheel to search the Cue point you like, then press the Cue button.
20. LOOP OUT button
This button is used to set the ending point of a loop. A loop is started by pressing the
CUE button in the pause
mode and ending by
pressing the OUT button. The loop will continue to play until the RELOOP/EXIT button
20
is pressed once again.
If a SEAMLESS LOOP has been made, but the player is not actively in seamless loop mode, pressing the reloop
button will instantly reactivate the seamless loop mode. To exit loop, press the button again. RELOOP will
appear in the LCD display when the RELOOP function is activated. During play mode, pressing the RELOOP
button will instantly return play to the last set point without interrupting playback.
You can hold the TRACK knob and press OUT button to set a new ending out when it is not in RELOOP mode.
21. Jog wheel
This wheel has multiple functions:
1) Frame Search -
The jog wheel will act as a frame search control when the track in the pause or cue mode,
allowing you to set a point.
2) Pitch Bend -
The wheel also works as a pitch bend during playback, similar to a “push” or a “drag” on a
turntable. Turning the wheel clockwise will increase the pitch percentage up to 100%, and turning the wheel
counterclockwise will decrease the pitch percentage down to -100%. The pitch bend will be determined on
how long you turn the jog wheel continuously.
3)
Input volume control -
The jog wheel also acts as input volume control during in the record mode when set
manual control in the internal menu, allowing you to set input volume.
(refer to P18/item 7)
22.
RECORD MODE button
This button is used to switch RECORD / NORMAL mode.
When REC MODE LED is on, the recording information will illustrate in the display as below:
ELAPSED TIME:
Indicates the elapsed time of a recorded fi le.
REMAIN TIME:
Indicates the remaining time of a recorded fi le.
TOTAL REMAIL:
Indicates the remaining time of the whole USB device.
When CLIP LED is lighting red, the REC. input level is over the safety ranger.
MCU-20A(P40) 090516 Rev..indd 章節2:34
MCU-20A(P40) 090516 Rev..indd 章節2:34
2016/9/6 上午 11:06:09
2016/9/6 上午 11:06:09
