38
ENGLISH
PART NAMES AND FUNCTIONS
47. Disc Tray OPEN/CLOSE button
Pressing this button will open the CD tray. The open function will only when the unit is in cue or pause mode,
this is to prevent accidentally ejecting the disc when in play mode. Press the button again to close the CD tray.
48. Source select button
Use this button to switch between the three media modes – CD/USB1/USB2.
49.
CUE button
A Cue point is self-defi ned starting point, usually at the beginning of a beat. Pressing the cue button during
playback immediately pause playback and returns the tracks to the last set cue point. By pressing and holding
the Cue button you will return to Play mode until you release the button again. The player will then returns to the
Cue point and go into Pause mode.
This function allows you to set a cue point and the point also can be the starting point of a seamless loop.
50. LOOP OUT button
This button is used to set the ending point of a loop. A loop is started by pressing
the CUE button in pause
mode and it is ended by pressing the OUT button.
The loop will continue to play until the
EXIT/RELOOP
button
is pressed once again.
51. RELOOP/EXIT button
If a SEAMLESS LOOP has been made, but the player is not actively in seamless loop mode, pressing the reloop
button will instantly reactivate the seamless loop mode. To exit loop, press the button again. RELOOP will
appear in the LCD display when the RELOOP function
is activated.
During play mode, pressing the RELOOP button will instantly return play to the last set point without interrupting
playback.
Remote Controller
MCU-20A(P40) 090516 Rev..indd 章節2:38
MCU-20A(P40) 090516 Rev..indd 章節2:38
2016/9/6 上午 11:06:10
2016/9/6 上午 11:06:10
