Load the filament
Replace the filament:
Replacement in daily life: unload the filament then repeat the load process. Replacement during the printing process：please slow the printing speed to
10% and cut off the filaments nearby the feeding inlet. Insert the new filament and repeat the loading operation, adjust the printing speed to 100%, and
resume printing.
Unload:
Select [Control]-[Automatic Unload], wait for the extruder heating to the target temperature. Press the feeding handle, and press the filament down for 1-2
seconds, then pull out the filament quickly.
22
25/0℃
26/0℃
25/0℃
26/0℃
装料
退丝：
在显示屏上选择【控制】-【自动退丝】，等待喷头加热至目标温度。按压送丝把手，先将耗材向下按压1-2秒，然后快速手动拔出耗材。
Unload
退丝
load
进丝
更换耗材：
日常生活中更换耗材：退丝后重复进丝步骤即可；打印过程中更换耗材：点击【设置】，将打印速度降低为10%，剪断送丝口处的耗材，将新耗材插入进丝口，重复进丝操
作，打印速度调整为100%即可。
25/0℃
26/0℃
25/0℃
26/0℃