Level
10
Note: The UI information is only for reference, the actual
UI may be different.
Please make sure the PEI plate is aligned with the heating board before leveling.
！
Check the steadiness of the build plate before leveing. If the build plate is unsteady,
please use an open-end wrench to adjust the V-wheel to steady it.
Choose [Auto Home] first to ensure the extruder in the home position; then choose [Disable Steppers] to assist in leveling.
17
Leveling operation video can be found on Voxelab Youtube channel
25/0℃
26/0℃
25/0℃
26/0℃
调平
选择【回零】，等待喷头自动回零；选中【关闭电机】以便进行下一步调平操作。
注意：界面仅供参考，实际以UI为准。
调平前请确保PEI钢板与铝基加热板齐平。
调平平台前请确认一下平台有无晃动；若有，请使用开口扳手调节一下左右两侧v型
轮松紧度，使得平台滑动顺畅且无晃动。