Voxelab Aquila S2, User Manual, Page: 13 / 36

Install X-axis tensioner
5
X-axis tensioner *1
1. Disassemble the X-axis tensioner.
3. Tighten tensioner with a plastic hand screw nut, and then lock it
with two M5x14 screws on X-axis profile.
2. Insert the synchronous belt into the tensioner block, and reassemble the X-axis tensioner.
Hexagon socket head cap
screws M4x8*2
M5x14
Hexagon socket button head
screws M5x14*2
X-axis limit sensor kit *1
11
安装X轴张紧器
X轴张紧器 *1
将X轴张紧器拆分为三个部分。
将同步带一头穿过张紧轮。
锁紧张紧轮，用两颗M5x14螺母将X轴张紧器安装在X轴型材上
（如图所示）。
X轴限位传感器 *1
内六角平圆头螺钉M5x14 *2
内六角圆柱头螺钉M4x8 *2