46
Troubleshooting
error message on dIsPlay
PossIble cause and elImInatIon
Navigation not possible.
Please clear the way.
The Kobold VR200 robot vacuum cannot continue moving because the way is blocked.
•
Please remove any objects in the way, or move the robot vacuum a few centimetres to
the side.
The robot vacuum was picked up while cleaning and set down somewhere else.
•
Please do not move the robot vacuum too far (less than 0.5 metres), since it may
have navigation problems otherwise.
Furniture was moved, doors opened/closed or the robot vacuum itself shifted items
during cleaning.
•
Please do not rearrange things while cleaning.
If the robot vacuum has navigation problems, shut it down completely under the menu
item “Settings”, function “Switch Robot Off”, and switch it back on with the green
button.
The dust compartment cover is not fully closed.
•
Please ensure it engages properly.
fault
PossIble cause and elImInatIon
The cleaning performance of the
Kobold VR200 robot vacuum
has decreased.
The dust container is probably full.
•
Empty the dust container and clean the filter.
The brushes are dirty.
•
Clean the round and side brushes (see Section “4.2 Cleaning the side brush” on
page 39 and Section “4.3 Cleaning the round brush” on page 40).
The robot vacuum does not respond.
The batteries may be drained.
•
Charge the robot vacuum on the base station (see Section “2.7 Setting up the base
station” on page 18).
•
Make sure that the mains cable and mains plug are properly connected to the base
station and the outlet. The robot vacuum will discharge if it is not docked on the base
station.
