22
First steps
Item Kobold Vr200 remote control
1
HOME button (back to base station)
2
SPOT button (“SPOT cleaning” mode)
3
ECO button (ECO option)
4
Direction buttons for remote control
5
START button (switching on and off)
6
Battery compartment (open)
7
Battery type: CR2025 (observe correct polarity for replacement)
2.9.1 Putting the remote control into operation
A CR2025 button cell is installed in the remote control at delivery,
7
protected
against discharging by a protective film.
•
Remove the protective film prior to first useby pulling the protective film out
of the
8
remote control by the tab.
There is another protective film on the HOME, SPOT and ECObuttons.
•
Remove this protective film prior to
9
first use as well.
Information on using the remote control is found in Section 3.8 on page 34.
7
6
1
2
3
4
5
Figure 2.10 Kobold VR200 remote control
8
9
Figure 2.11 Removing the protective film
