30
Operation
If the Kobold VR200 robot vacuum did not start at the base station, or if it
has only cleaned for a short time, the selection item “Move to Start” cannot
be selected on the display.
3.5
standby mode
•
Press the
start/stop button
(push and hold > 6 seconds).
The robot vacuum switches off and enters standby mode.
•
When you press the
start/stop button
again, it switches back on and the
display lights up.
The robot vacuum is operational again.
Without contact to the base station, the robot retains all sett ings in standby
mode for a few weeks until it is fully discharged.
Figure 3.17 Press the start/stop butt on on
the robot vacuum for standby
mode.
