40
Maintenance
4.3
cleaning the round brush
Clean the round brush if threads or hair are wrapped around it.
Warning! Risk of electric shock!
•
Always switch off the device and disconnect the mains plug before all
changeover, cleaning and maintenance tasks.
remoVIng tHe round brusH
•
Lay the robot vacuum upside down on the floor or a table.
•
Remove the side brush
1
(see section “4.2 Cleaning the side brush” on
page 39).
•
Using both hands at the same time, press the latches
2
on both sides of the
brush cover forward to unlock.
•
Remove the brush cover from the robot vacuum.
3
.
•
First lift the left side of the round brush out of the robot vacuum
4
and then
pull the right side off the axle
5
to remove the round brush.
cleanIng tHe round brusH
•
Remove lint, hair and other dirt from the round brush.
•
Make sure that the green bearing
6
and the metallic cup and ball bearing un-
derneath on the left end of the round brush do not come off.
Notice! Risk of damage due to improper use!
•
The round brush is not dishwasher safe nor waterproof.
Figure 4.7 Removing the round brush
2
6
4
1
2
3
5
