22
Troubleshooting, electrical schematic
If you discover the following circumstance, please inspection and handling as following:
ENGLISH
Problem
Check
Action
No air blows even if hands are
inserted
Do the display indicators lights
up?
Is the power switch on?
Are you putting your hands all the
way in?
• Turn the ground-fault circuit breaker on.
• Turn the power switch on.
• Put hands all the way in.
Machine works long time after
hands drawn out. finally shows
E2
• Any dirt or foreign body on
sensor?
• Switch off the power button, and then remove dirt or
foreign body on sensor after the power light gone out;
when finished, switch on power button.
No hot wind
• There is a built-in heater in the
unit. Any dirt on heating sensor?
• Fuse inside terminal box blown?
• Is the ambient temperature higher than 20°C?
• Switch off power, remove front cover, there is a
terminal box inside, take down the cover of terminal
box. check the fuse inside box which is blown or not
Airflow is too low
• Is the speed button on low level? • Put speed button on the high level.
If the above actions do not work, turn off the power and the ground-fault circuit breaker, and call your dealer to inspect
and repair it if necessary.
Summary of Contents for VORT SUPER DRY
Page 42: ...42 Note ...
Page 43: ...43 Note ...
