19
Using the unit
Self-check indicator
When a malfunction or error occurs, the self-check
indicator on the right side will either light up or flash.
Turn off the power switch, wait about 40 seconds until all
the indicators go off, then turn on the power switch.
If the indicator still lights up or flashes, turn off the power,
disconnected the unit from the socket, and contact your
dealer immediately.
Usage label
Stick the usage label on the visible place (the front of the
unit or the wall nearby) (Fig.9)
When using the unit:
• Turn on the power switch
• The power indicator lights up
• The lamp lights up
• The cover of power supply is closed
ENGLISH
66
77
88
99
• Stretch out both hands and insert
them all the way in.
The unit starts to run automatically.
(Fig.6)
• Pull them out slowly, letting the air
blow the water off. (Fig.7)
• Pull them out completely. (Fig.8)
See fig. 4:
- "Heating switch" button OFF:
heating element off, for summertime operation;
- "Heating switch" button ON:
-- "Speed switch" button L: heating element always on;
-- "Speed switch" button heating element on if room T < 20°C, off if room T > 25°C.
Summary of Contents for VORT SUPER DRY
Page 42: ...42 Note ...
Page 43: ...43 Note ...
