Vortice VORT PRESS 240 I, Instruction Booklet

Page: 10 / 28

• Make sure the electrical grid data correspond to the data on the rating label of the product
(Fig.B)
Installation
Typical applications Fig. A
Installation process (Fig.1 - 24)
Electrical connections
Wiring diagrams (Fig. 15 - 20)
Initial settings
- The product operating speed must be selectionated during the installation
phase using a dipswitch as shown under , according to the type of command
that the user wants to use.
- The product is also equipped with a timer PCB to alert the user when it’s time
to clean or to change the filter.
This PCB is powered by a CR2032 battery , at first start up is necessary to re-
move the protection plastic tab from the battery as shown in (Fig.4).
Once removed close the PCB with its own cover and push for a few seconds in
the indicated area (Fig.5) to start or reset (in case of maintenance) the filter
maintenance timer.
10
3 Speeds Potentiometer
1
2
SW3
O
N
1
2
SW3
O
N
ENGLISH