Vortice Nordik HVSL Super Blade, Instruction Booklet

Page: 15 / 64

15
WARNING!
Before moving the equipment, you must:
a.
Stop the machine;
b. Switch off the power supply;
To lift the machine, use adequate lifting gear (see weights table).
Lift it slowly, being careful that it does not fall, and move the belts according to the centre of gravity. Only lash-
ing and securing methods may be used that ensure the machine's stability and prevent a risk of it falling during
the operation.
3.3
Warranty
This equipment is guaranteed for 24 months from the date of production, for any faults due to proven factory or
material defects. The guarantee does not cover parts damaged in transit, due to poor or incorrect mainte-
nance, negligence, unskilled use, improper use, tampering by unauthorised personnel and/or, due to any cause
for which the Vortice S.p.A. Company is not responsible. During the guarantee period, Vortice S.p.A. under-
takes to replace or repair parts of the product free of charge, that are found to have been defective from the
outset, provided they are reported by the user immediately or at most within 15 days of discovering the fault in
the product.
Malfunctioning of the ceiling fan due to faults in components and/or irregularities relating to parts of the product
not reported immediately, in the specific manner indicated in this manual or the sales agreement, may not, under
any circumstances, infer responsibility on Vortice S.p.A.'s part, and must be seen to be the user's risk and
danger due to unforeseeable use.
Work under guarantee must be done in Vortice S.p.A.'s premises, with transport paid for by the user.
3.4 Storage and landing - up
The product must be kept in a cool, dry place, not subject to high humidity percentages, and correctly positioned
on shelves or pallets. Especially the aluminium blades must be placed on adequate shelves, which does not
allow them to bend. In any case, when drawn from the stores, check that they are not curved. The product may
be stored for 6 months, after which we recommend checking that the electric motor is working properly, before
installing it. Check that there are not cracks or breaks in metal parts of the ceiling fan, especially in the blade
fixing hub or the blades themselves.
4 ASSEMBLY
Specific assembly instructions – see the assembly instruction manual
Disassembly instructions
–
see the assembly instruction manual