Typical application
Fig. 1-5;
Fig.5: A= inlet; B= outlet
N.B.
The appliance’s outlet port must always be
connected to a suitable duct.
Installation
Fig. 6-17;
N.B.
If the appliance is installed without a duct attached to
its inlet port (i.e. with an open air intake) and at a
height below 2.3 metres,a protective grille must be
fitted over the inlet port (fig.1).
N.B.
Use of the supplied brackets is optional (see figures
6 to 12).
Electrical Connections
Fig.14
Maintenance / Cleaning
Fig. 18-21
Important information
concerning the
environmentally compatible
disposal
IN CERTAIN EUROPEAN UNION COUNTRIES THIS
PRODUCT DOES NOT FALL WITHIN THE
REQUIREMENTS OF THE NATIONAL LAWS
IMPLEMENTING DIRECTIVE WEEE, AND IN
THESE COUNTRIES THE PRODUCT IS NOT
SUBJECT TO SEPARATE DISPOSAL OPERATIONS
AT THE END OF ITS WORKING LIFE.
This product conforms to EU Directive2002/96/EC.
This appliance bears the symbol
of the barred waste bin. This
indicates that, at the end of its
useful life, it must not be disposed
of as domestic waste, but must
be taken to a collection centre for
waste electrical and electronic
equipment, or returned to a
retailer on purchase of a replacement.
It is the user's responsibility to dispose of this
appliance through the appropriate channels at the
end of its useful life. Failure to do so may incur the
penalties established by laws governing waste
disposal.
Proper differential collection, and the subsequent
recycling,
processing
and
environmentally
compatible disposal of waste equipment avoids
unnecessary damage to the environment and
possible related healthrisks, and also promotes
recycling of the materials used in the appliance.
For further information on waste collection and
disposal, contact your local waste disposal service,
or the shop from which you purchased the appliance.
Manufacturers
and
importers
fulfil
their
responsibilities for recycling, processing and
environmentally compatible disposal either directly or
by participating in collective systems.
9
ENGLISH
WARNING
This appliance must be connected during
installation to the accompanying control box, from
which all the relative functions and settings are
selected.
Summary of Contents for A 100 MD
