background image

17  

16

LOS Mode

The LOS (Line of Sight) mode is intended for rifle shooters 
who are using slope correcting ballistic drop data cards, 
ballistic cell phone applications, or other devices with 
ballistic programs and who are shooting at distances beyond 
500 yards and with slopes greater than 15 degrees.

The range number displayed in LOS mode is the actual 
line of sight range with no ballistic correction for slope. 
Most of the commonly used ballistic devices can provide 
independent slope correction for bullet drop data and 
require actual line of sight range input. Using the LOS 
range when calculating bullet wind drifts under these steep 
slope/long range conditions will provide a higher degree of 
accuracy than using the HCD range.

To use, simply input the LOS range number into the 
electronic device or use the LOS range when referencing 
ballistic drop cards with slope correction.

LOS Mode - Incline

When in LOS mode, an additional number is displayed 
above the yardage number. This number is slope incline 
shown in degrees.

The slope incline number can be entered into ballistic 
programs or field cards to help calculate precise bullet drops 
in mountainous terrain.

LOS Range

Incline Angle 

Summary of Contents for Razor HD 4000














Reviews: