background image

23  

22

SAFETY AND PRECAUTIONS

Do not stare into beam or view directly without laser eye 
protection. Staring continuously into beam for prolonged 
periods of time could cause harm to your eyes. If used 
properly, this device is safe for your eyes and laser eye 
protection is not needed. 

•  Use the correct battery (CR2) and proper battery orientation. 
•  Do not look at sun.
•  Do not activate Menu or Measure buttons while aiming at 

eye or looking into objective lens. 

•  Do not disassemble.
•  Do not allow children to play with unit.

CAUTION—Use of controls, adjustments or performance of 
procedures other than those specified herein may result in 
hazardous laser radiation exposure.

VIP WARRANTY

OUR UNCONDITIONAL PROMISE TO YOU.

We promise to repair or replace  

the product. Absolutely free.

Unlimited

Unconditional

Lifetime Warranty

Learn more at www.VortexOptics.com

[email protected] • 800-426-0048

Note: The VIP Warranty does not cover loss, theft, deliberate 

damage, or cosmetic damage not affecting product performance. 

CLASS 1 LASER PRODUCT

THIS PRODUCT COMPLIES WITH IEC 60825-1:2007-03 Ed.2.0 AND 

IEC 60825-1:2014-05 Ed.3.0 
THIS PRODUCT COMPLIES WITH 21CFR SUBCHAPTER J PARTS 1040.10 

AND 1040.11   EXCEPT FOR DEVIATIONS PURSUANT TO LASER NOTICE 

NO.50 DATED JUNE 24, 2007.

Sheltered Wings, Inc. One Vortex Drive, Barneveld, Wl 53507 October 2018

Summary of Contents for Razor HD 4000














Reviews: