7
6
MODE SELECTION
The Razor
®
HD 4000 is factory set to the angle compensating
HCD range mode, normal target mode, brightness level 4 and
displayed in yards.
To change modes:
After the Razor HD
4000 is powered up,
activate the Mode/Display
Selection by pressing and
holding the Menu button
for at least four seconds.
Use the Menu button to activate the Mode Selection
displays. Use the Measure button to toggle through each
Mode Selection option. You may exit Mode Selection at any
time and save your settings by pressing and holding the
Menu button for at least four seconds.
Use the Measure
button to toggle
through each Mode
Selection option.
Use the Menu button to
activate the Mode/Display
Selection displays.
Adjust the Eyecup
The eyecup on the Razor
®
HD 4000 twists up and down
so any viewer can see the full field and enjoy comfortable
viewing and ranging – with or without eyeglasses. When not
using eyeglasses or sunglasses, it is recommended to keep
the eyecup fully extended. For best viewing when wearing
eyeglasses, twist eyecups down.
Focus
Adjust the diopter until the image is sharp. Make note of this
diopter setting in case you need to set it again.
Low Battery Icon
The low battery icon displays once the
battery reaches 25% life and stays on
until there is no power.
Battery Power Indicator
