MMI Fileter IPs Table list:
Add or delete the IP address segments that access to the gateway.
Set initial IP address in the Start IP column, Set end IP address in the End IP column, and click
Add to add this IP segment. You can also click Delete to delete the selected IP segment.
NOTICE:
Do not set your visiting IP outside the MMI filter range,otherwise,you can not logon through
the web.
4.3.4.10. DSP Config
In this page, you can configure voice codec, input/output volume and so on.
DSP Configuration
Coding Rule
Select DSP voice coding rule. Such as G.711A/u, G726-32k, G.729
,
ilbc
Signal Standard
Select Signal Standard.
Input Volume
Specify Input(MIC) Volume grade.
Output Volume
Specify Output(receiver) Volume grade.
G729 Payload Length
Set G729 Payload Length
DTMF Payload Type
Set DTMF Payload Type
iLBC Payload Type
Set iLBC payload type, the default is 97
iLBC Payload Length
Select iLBC payload length.
CallerID Tx Mode
Set transfer Caller ID through the DTMF or FSK mode
Fax Mode
Set the FAX mode.
Flashhook Min Time
Set the min time of flash hook.
Flashhook Max Time
Set the max time of flash hook.
VAD
Select it or not to enable or disable VAD.
4.3.4.11. VPN Config
This web page provides us a safe connect mode by which we can make remote access to enterprise inner
network from public network. That is to say, you can set it to connect public networks in different areas into
inner network via a special tunnel.
27
Summary of Contents for VG2020
Page 1: ...VG2020 Version V1 6 80 20 ...