manualshive.com logo in svg

VOPtel VG2020, User Manual, Page: 22 / 38

Share
Download
VOPtel VG2020 User Manual Download Page 22

 

 

highest priority

802.1P Priority

 

Specify 802.1P Priority of voice/signal data packet.

 

Data 802.1P Priority

 

Set 802.1p of data VLAN. Non-VoIP data(such as http ,telnet ,ping 
etc) will use this value to set VLAN patcket.

Voice VLAN ID

 

Set VLAN ID of voice/signal data packet

 

Data VLAN ID

 

Set 802.1q of data VLAN ID. Non-VoIP data(such as 
http ,telnet ,ping etc) will use this value to set VLAN patcket.

 

Notice:

 

1

）

Startup VLAN, if set Voice/Data VLAN differentiated as Undifferentiated, all packets will 
use the Voice VLAN ID as the tag. 

2) Startup VLAN, if set Voice/Data VLAN differentiated as tag differentiated and disable the 

DiffServ, then system will not distinguish the voice and data, all packets will use the Voice 
VLAN ID as the tag. 

3) Startup VLAN, if set Voice/Data VLAN differentiated as tag differentiated and enable the 

DiffServ, then system will distinguish the voice and data and add the VLAN ID each other. 

4) Startup VLAN, if set Voice/Data VLAN differentiated as data untaged, then the packet of the 

signal/voice will use the Voice VLAN ID as the tag, but the data packets will not take the 
VLAN tag. 

5) If Disable the VLAN, regardless to set the Voice/Data VLAN differentiated or not, all 

packets will not take the VLAN tag; If enable the DiffServ, all packets will only take the 
DiffServ value. 

6) One must to notice, enable the VLAN ID Check Enable that is default, If enable it, the 

gateway will match the VLAN ID strictly. When others' VLAN ID dismatch with us, the 
packets will discard. contrarily, the gateway will accept the packets with the distinct VLAN 
ID. 

7) You must gain the IP with the Static mode when you set VLAN, otherwise can't gain the IP 

in the VLAN and also can not dial with point to point.

 

 

 

4.3.4.6. Advance SIP Configuration

 

In this web page, you can config SIP STUN, Private Server and so on. 
STUN: 

By STUN server, The gateway in private network could know the type of NAT and the NAT mapping IP 

and port of SIP. The gateway might register itself to SIP server with global IP and port to realize the device 
both calling and being called in private network. 

 

 

 

 

 

 

 

 

 

 

 

 

22 

Summary of Contents for VG2020







































Reviews:

No comments