Netmask
Input the Netmask distributed to you.
Gateway
Input the Gateway address distributed to you.
Set DNS domain postfix. When the domain which you input can
DNS Domain
not be parsed, gateway will automatically add this domain to the
end of the domain which you input before and parse it again.
Primary DNS
Input your primary DNS server address.
Alter DNS
Input your standby DNS server address.
Please select the proper network mode according to the network condition. this VoIP Gateway
provide three different network settings:
z
Static: If your ISP server provides you the static IP address, please select this mode, and
then finish Static Mode setting. If you don’t know about parameters of Static Mode setting,
please ask your ISP for them.
z
DHCP: In this mode, you will get the information from the DHCP server automatically;
need not to input this information artificially.
z
PPPoE: In this mode, your must input your ADSL account and password.
If you uses PPPoE mode
，
you need to make the above setting.
PPPoE Server
It will be provided by ISP.
User
Input your ADSL account.
Password
Input your ADSL password.
Notice:
1
）
Click “Apply” button after finished your setting, IP Gateway will save the setting
automatically and new setting will take effect.
2
）
If you modify the IP address, the web will not response by the old IP address. Your need
input new IP address in the address column to logon in the gateway.
3
）
If networks ID which is distributed by DHCP server is the same as network ID which is used
by LAN of system, system will use the DHCP IP to set WAN, and modify LAN’s networks
ID(for example, system will change LAN IP from 192.168.10.1 to 192.168.11.1) when
system uses DHCP client to get IP in startup; if system uses DHCP client to get IP in
running status and network ID is also same as LAN’s, system will refuse to accept the IP to
configure WAN. So WAN’s active IP will be 0.0.0.0
4.3.2.2. LAN Config
LAN Configuration
11
Summary of Contents for VG2020
Page 1: ...VG2020 Version V1 6 80 20 ...