Shows the outside WAN port IP address and the inside LAN port IP address.
Outside IP
Set the outside Wan port IP address of DMZ.
Inside IP
Set the inside LAN port IP address of DMZ
Click the
Add
button to add new table; click the
Delete
button to delete the selected mapping
table.
Note: 10M/100M adaptive means the network card, and other equipment physical consultations
speed, testing speed under bridge mode near to 100M, in order to ensure the quality of voice
and communications real-time performance, we made some sacrifices of NAT under the
transmission performance.
transmit with full capabilty only when system is idle
, so can
not guarantee that the transmission speed reach to 100M.
4.3.4.3. Net Service
In this web page, you can select Telnet/HTTP/RTP port, at the same time you can check
DHCP leased table.
Net Service
HTTP Port
set web browse port, the default is 80 port
，
if you want to enhance
system safety
，
you'd better change it into non-80 standard port
；
Example: The IP address is 192.168.1.70. and the port value is
8090, the accessing address is http://192.168.1.70:8090
Telnet Port
Set Telnet Port, the default is 23. You can change the value into
others.
Example:
The IP address is 192.168.1.70. the telnet port value is 8023, the
accessing address is
telnet 192.168.1.70 8023
RTP Initial Port
Set the RTP Initial Port. It is dynamic allocation.
RTP Port Quantity
Set the maximum quantity of RTP Port, the default is 200.
DHCP Leased Table
IP-MAC mapping table. If the LAN port of the gateway connects to
a device, this table will show the IP and MAC address of this device.
Notice:
1
）
You need save the configuration and reboot the gateway after set this page.
2
）
If you modify the port of Telnet and HTTP, you would better set the value more than 1024
18
Summary of Contents for VG2020
Page 1: ...VG2020 Version V1 6 80 20 ...