voptech E02 User Manual Download Page 58

Page: 58 / 64

58 / 64

Trouble Shooting

When the device does not work properly, users may try the following methods to recover the device or

gather relative information and send an issue report to support.

10.1

Get Device System Information

Users may get the device system information by pressing [Settings] -> [Status]. The following basic

information will be provided:

Mode
IP
Software Version
More…
User can select [More] item to get more information in detail.

10.2

Upgrade to the latest software

Manufacturer will keep publishing software update to fix bugs and improve device features. The device

will check for new software release on manufacturer cloud server automatically and periodically.

10.3

Reboot Device

Users may reboot the device from soft-menu, [Menu] -> [Reboot System], and confirm the action by [Yes].

Or, simply remove the power supply and restore it again.

10.4

Reset Device to Factory Default

Reset Device to Factory Default will erase all user’s configuration, preference, database and profiles on

the device and restore the device back to the state as factory default.

To perform a factory default reset, user should [Menu] -> [Settings] -> [Advanced settings], and then

input the password to enter the interface. Then choose [Reset to Default] and press [Enter], and confirm the
action by [Yes]. The device will be rebooted into a clean factory default state.

Summary of Contents for E02

































































Search results

Summary of Contents for E02

Reviews:

Related manuals for E02

Brands by name

Popular brands

voptech E02, User Manual

Search results

Summary of Contents for E02

Reviews:

Related manuals for E02

Brands by name

Popular brands