voptech E02 User Manual Download Page 36

Page: 36 / 64

36 / 64

7.5

Set Device Language

When the device is in the default standby mode.



Press soft-button [Menu] till you find the [Settings] item.



Enter [Settings] item till you find the [Basic Settings] item.



Enter [Basic Settings] item till you find [Language] item.



User can change the language by using the navigation keys.

7.6

Reboot the Device

When the device is in the default standby mode.



Press soft-button [Menu] till you find the [Reboot System] item.



Press [Enter] button, a warning message “Reboot Now?” will be prompt to user.



Press [Yes] button to execute the reset command, or [No] to exit.

7.7

Reset to Factory Default

When the device is in the default standby mode,



Press soft-button [Menu] till you find the [Settings] item, and press [OK] or [Enter] button.



Enter [Advanced Settings] item, then input the device PIN (Default PIN is 123) to enter the interface.



Enter [Reset to Default] item, then a warning message “Factory Reset, Continues?” will be prompt to

user.



Press [Yes] or [OK] button to execute the reset command, or [No] to exit.

Summary of Contents for E02

































































Search results

Summary of Contents for E02

Reviews:

Related manuals for E02

Brands by name

Popular brands

voptech E02, User Manual

Search results

Summary of Contents for E02

Reviews:

Related manuals for E02

Brands by name

Popular brands