VonShef.com
OPERATION
•
Select required thickness by turning the THICKNESS ADJUSTER located behind the table. Turn the
THICKNESS ADJUSTER clockwise for thinner slices, and counter-clockwise for thicker slices. The working
range of thickness for the adjuster is 0-20mm.
•
When the blade is rotating, push the SLIDER TABLE towards the blade, using the handle to ensure
fingers are kept safely away from the BLADE. Move the SLIDER TABLE back and forth in a smooth motion
keeping the food firmly pressed against the THICKNESS GUIDE for an even slice.
•
Do not operate the appliance for more than 10 minutes at a time. This could cause the motor to overheat.
Turn off the appliance using the ON/OFF SWITCH. Unplug from the mains and let it rest for at least 30
minutes to allow the motor to cool.
CAUTION: If the rotational speed reduces
during slicing, let the blade run without any
slicing for a few minutes to clear any blockage,
then continue slicing. If the blade speed does
not continue to increase after running for a few
moments, switch it off and unplug before
removing any debris carefully from the blade if
this is causing the blockage.
