CLEANING & MAINTENANCE
With the
ROLLER BARREL
removed, fill a
bucket or large container with warm, soapy
water.
Attach the
PAINT CAN CLIP/FILL TUBE
to
the bucket or container and insert the nozzle
into the
PAINT TUBE.
Extract the soapy water by pulling the
PLUNGER
so all of the water is inside the
PAINT TUBE.
Pump all of the water back out of the
PAINT
TUBE
and into the bucket or container.
REPEAT
this process around 5 times until the
PAINT TUBE
is clean.
NOTE:
You may wish to dispose of the dirty
water after 2 pumps and replace with warm
and soapy clean water to aid the removal of
paint.
Remove the
ROLLER FRAME
and immerse
the
PAINT TUBE
in a fresh bucket of warm,
soapy water.
As in the previous step, pull back the
PLUNGER
and pump the warm water in and
out of the
PAINT TUBE
to clean.
Repeat 4-5 times until the water remains clear.
Disassemble the
FILL TUBE COLLAR
and
DUCK VALVE
at the base of the
PAINT TUBE
ready for cleaning as shown below.
Wash the removable components in warm,
soapy water and scrub clean with a soft
sponge.
Completely dry the
DUCK VALVE & FILL
TUBE COLLAR
before re-coating with a thin
layer of the
PETROLEUM JELLY
supplied.
