communication
–
simple
–
flexible
–
unlimited
© Vonamic GmbH 2021
Subject to technical modifications
4
1.2
How to get access to the web interface
192.168.100.90 /
255.255.255.0
192.168.100.91 /
255.255.255.0
192.168.100.250 /
255.255.255.0
Cat.5e
Cat.5e
To view and edit the web interface you need a PC with RJ45 network connection, a PoE switch (IEEE
802.3af) and a browser (Internet Explorer, Firefox, Chrome etc.) To begin with the initial configuration
stage, you need to reconfigure your PC’s IP address and subnet mask so as to make sure the PC can
communicate with the V910
. After changing PC’s IP address (for example, 192.168.100.250) you can
access the Web interface of the device using the V910 default IP address.
The factory default configurations of the V910 are as follows:
IP address:
192.168.100.10
Subnet mask:
255.255.255.0
Login:
User (limited write) /
admin / superadmin
Password:
Vonamic / Vonamic / Vonamic
Note:
If you are using a system that has already been configured, please use the IP address
range of your system. The examples in this manual use the IP address range of the
factory default.
1.
Power up the PC that you will use for the initial configuration. Please make sure the PC has the
Ethernet RJ45 connector to be connected to the switch via standard Ethernet LAN cable.
2.
Reconfigure the PC’s IP address and subnet mask as below, so that it can communicate with the
switch. The method to change the PC’s IP address, for example, for a PC running Windows®
7/8.x/10, is as follows:
