Volvo XC 60 TWIN ENGINE, Owner'S Manual

Page: 143 / 620

INSTRUMENTS AND CONTROLS
}}
* Option/accessory. 141
Active bending lights
*
Active bending lights are designed to provide
maximum illumination in bends and junctions.
Cars with LED
22
headlamps
*
can have active
bending lights, depending on the car's equip-
ment level.
Headlamp pattern with function deactivated (left) and
activated (right) respectively.
Active bending lights follow steering wheel move-
ments to provide maximum illumination in bends
and junctions and can thereby increase safety.
The function is activated automatically when the
car is started. In the event of a fault in the func-
tion, the
symbol illuminates in the driver
display at the same time as the driver display
shows an explanatory text.
The function is only active in weak daylight or
darkness and only when the car is moving and
dipped beam is switched on.
Deactivating/activating the function
The function is in activated mode when the car is
delivered from the factory and can be deacti-
vated/activated via the centre display in two
ways:
Via the function view
Press the Active Bending
Lights button.
Via settings
1. Press Settings in the top view.
2. Press
My Car Lights and Lighting
Exterior Lights .
3. Deselect/select Active Bending Lights
.
Related information
•
Settings in the centre display (p. 169)
Rear fog lamp
The rear fog lamp is considerably stronger than
the normal rear lights and should only be used in
reduced visibility due to fog, snow, smoke or
dust so that other road users have an early warn-
ing of a vehicle ahead.
Button for rear fog lamp.
The rear fog lamp consists of a lamp on the left-
hand side on a left-hand drive car, or on the right-
hand side on a right-hand drive car.
The rear fog lamp can only be switched on when
ignition position
II is active or the car is running
and the rotating ring on the stalk switch is in
position
or .
22 LED (Light Emitting Diode)