DRIVER SUPPORT
}}
* Option/accessory, for more information, see Introduction.
209
Adaptive cruise control
*
- set time
interval
Different time intervals to the
vehicle in front can be selected
and shown in the combined
instrument panel as 1-5 hori-
zontal lines - the more lines the
longer the time interval. One
line corresponds to approxi-
mately 1 second to the vehicle in front, 5 lines
approximately 3 seconds.
To set/change the time distance:
•
Turn the thumbwheel on the steering wheel
keypad (p. 206) (or use the
/
buttons
for cars without Speed limiter).
At low speed, when the distances are short, the
adaptive cruise control increases the time interval
slightly.
The adaptive cruise control allows the time inter-
val to vary noticeably in certain situations in order
to allow the car to follow the vehicle in front
smoothly and comfortably.
Note that a short time interval only allows the
driver a short time to react and take action if any
unforeseen traffic problem should arise.
The same symbol is also shown when Distance
Warning (p. 201) function is activated.
Only use the time intervals permitted by local
traffic regulations.
If the adaptive cruise control does not appear
to react when activated, this may be because
the time distance to the vehicle in front is pre-
venting an increase in speed.
The higher the speed the longer the calcula-
ted distance in metres for a given time inter-
val.
Read more how speed is handled (p. 207).
Related information
•
•
•
•
Adaptive cruise control
*
- temporary
deactivation, and standby mode
The adaptive cruise control can be temporarily
deactivated and set in standby mode.
Temporary deactivation/standby mode
- with speed limiter
To temporarily disengage the adaptive cruise
control and set it in standby mode:
•
Press the steering wheel button
This symbol and the stored speed's
marking then change colour from
GREEN to WHITE.
Temporary deactivation/standby mode
- without speed limiter
To temporarily disengage the adaptive cruise
control and set it in standby mode:
•
Press the steering wheel button
Standby mode due to driver
intervention
The adaptive cruise control is temporarily disen-
gaged and set automatically in standby mode if:
•
the foot brake is used
•
the gear selector is moved to
N
position
(automatic gearbox)
•
the driver maintains speed higher than the
stored speed for longer than 1 minute.
The driver must then regulate the speed.
Summary of Contents for V60 Twin Engine
