Volvo V 90 Cross Country, Owner'S Manual, Page: 525 / 594

MAINTENANCE AND SERVICE
523
2. Unplug the connector from the bulb.
3. Detach the bulb by pushing it gently upwards
and pulling it straight out.
4. Fit a new bulb in the socket. The bulb's guide
pin must be aimed straight upwards.
5. Press in the connector.
6. Refit the headlamp's rubber cover.
Related information
•
Bulb replacement (p. 520)
•
Bulb specifications (p. 526)
Replacing the main beam lamp
The main beam lamp in halogen headlamps can
be replaced by the driver.
Before the bulb can be replaced, the plastic
cover over the headlamp must be removed; see
the section "Bulb replacement".
IMPORTANT
Never touch the glass part of the bulbs with
your fingers. Grease from your fingers is
vaporised by the heat, coating the reflector
and then causing damage.
Left-hand headlamp.
1. Detach the headlamp's rubber cover for the
main beam bulb.
2. Detach the bulb by turning the bulb holder
upward and then pulling straight out.
3. Carefully prize the plastic cover at the con-
nector's lock lug so that the lock lug relea-
ses.
4. Unplug the connector from the bulb.
5. Replace the bulb.
6. Fit the bulb in the socket and screw in.
7. Refit the headlamp's rubber cover.
Related information
•
Bulb replacement (p. 520)
•
Bulb specifications (p. 526)