INSTRUMENTS AND CONTROLS
}}
* Option/accessory.
163
mended that the programming for the buttons is
deleted when the car is sold; see the section
"Programming HomeLink
®
".
Related information
•
Programming HomeLink
®
*
32
Instructions for programming HomeLink
®
.
Programming HomeLink
®
In certain vehicles the ignition must be
switched on or in "accessory position" before
HomeLink
®
can be programmed or used.
Preferably fit new batteries in the remote con-
trol that will be replaced by HomeLink
®
for
faster programming and improved transmis-
sion of the radio signal. The HomeLink
®
but-
tons should be reset before programming,
see the heading "Resetting the HomeLink
®
buttons". When the reset is complete,
HomeLink
®
is set in "learn mode" and ready
for programming.
1. Press the
33
button on HomeLink
®
you want
to program. The indicator lamp
33
on
HomeLink
®
should flash yellow once per
second. It is not necessary to hold the button
depressed.
2. Aim the remote control towards the
HomeLink
®
button to be programmed and
hold it 2-8 cm from the button. Do not
obstruct the indicator lamp on HomeLink
®
.
Note:
Some remote controls can program
HomeLink
®
better at a distance of
15-20 cm. Bear this in mind if you encounter
problems during programming.
3. Press and hold the button on the original
remote control to be programmed on
HomeLink
®
and keep an eye on the indicator
lamp. Do not release the button until the
indicator lamp has switched from flashing
yellow once per second to either flashing
green 10 times per second or illuminating in
a constant green glow. The button on the
remote control can be released once the
indicator lamp flashes or illuminates in green.
Note:
For some receivers, programming step
3 may need to be replaced with the instruc-
tions in step 4.
4. Press and release the button on the original
remote control every other second until the
indicator lamp has changed from flashing
yellow once per second to either flashing
green 10 times per second or illuminating in
a constant green glow.
32
Applies to certain markets.
33
See section "HomeLink
®
*
" for the location of buttons and indicator lamp.
Summary of Contents for V 90 Cross Country
