Volvo V 90 Cross Country, Owner'S Manual, Page: 453 / 594

AUDIO AND MEDIA
}}
* Option/accessory. 451
When using map navigation via Apple CarPlay
there is no guidance in the driver display or head-
up display, but only in the centre display.
The Apple CarPlay apps can be controlled via the
centre display, mobile phone or with the steering
wheel's right-hand keypad (applies to certain
functions). The apps can also be voice-controlled
using Siri. A long press on the steering wheel
button
starts voice control using Siri and a
short press activates the car's own voice control.
If Siri breaks off too early, hold the steering wheel
button
depressed.
By using Apple CarPlay you acknowledge
the following: Apple CarPlay is a service
provided by Apple Inc. under its terms and
conditions. Volvo Cars is thus not
responsible for Apple CarPlay or its
features/applications. When using Apple
CarPlay, certain information from your car
(including its position) is transferred to your
iPhone. In relation to Volvo Cars, you are
fully responsible for your and any others
person’s use of Apple CarPlay.
Related information
•
Media player (p. 442)
•
Connecting the car (p. 464)
•
Using Apple CarPlay
*
(p. 451)
Using Apple CarPlay
*
To use Apple CarPlay, Siri voice control must be
activated in your phone.
Connecting iPhone to Apple CarPlay
NOTE
Apple CarPlay can only be used if Bluetooth
is deactivated. A phone or media player con-
nected to the car via Bluetooth will therefore
not be available when CarPlay is active. An
alternative Internet source must be used to
connect to the Internet for the car's apps. Use
Wi-Fi or the car's built-in modem
* .
1. Connect the iPhone to the USB port. In the
cases where there are two USB ports, the
one with the white frame around the port
must be used.
2. Read the information in the pop-up message
and then tap on OK .
3. Tap on Apple CarPlay in the app view.
4. Read the terms and conditions and then tap
on
Accept
to connect.
> The subview with Apple CarPlay is opened
and compatible apps are shown.
5. Tap on the desired app.
> The app starts.
Starting Apple CarPlay
Apple CarPlay is started according to the follow-
ing, only after an iPhone has been connected.
1. Connect the iPhone to the USB port. In the
cases where there are two USB ports, the
one with the white frame around the port
must be used.
>
If the setting for automatic start is
selected
- the subview with
Apple CarPlay is opened and compatible
apps are shown.
2. If the subview with Apple CarPlay is not
opened, tap on Apple CarPlay in the app
view.
> The subview with Apple CarPlay is opened
and compatible apps are shown.
3. Tap on the desired app.
> The app starts.
Apple CarPlay runs in the background if another
app is started in the same subview. To show
Apple CarPlay in the subview again - tap on the
Apple CarPlay icon in the app view.