Volvo V 90 Cross Country, Owner'S Manual, Page: 493 / 594

WHEELS AND TYRES
}}
491
Using the emergency puncture
repair kit
Seal a puncture with the emergency puncture
repair kit, Temporary Mobility Kit (TMK).
Overview
Electrical cable
Air hose
Pressure reducing valve
Protective cap
Label, maximum permitted speed
Bottle holder (orange cap)
Pressure gauge
Sealing fluid bottle
Switch
Connecting
1. Set up the warning triangle and activate the
hazard warning lights if a tyre is being sealed
in a trafficked location.
If the puncture was caused by a nail or simi-
lar, allow this to remain in the tyre. It helps to
seal the hole.
2. Detach the decal for maximum permitted
speed that is affixed on one side of the com-
pressor. Affix it visibly on the windscreen as a
reminder to observe the speed limit. You
should not drive faster than 80 km/h
(50 mph) after the emergency tyre repair kit
has been used.
3. Check that the switch is in position 0 , and
locate the electrical cable and the air hose.
4. Unscrew the orange-coloured cap from the
compressor, and unscrew the cork from the
bottle.
NOTE
Do not break the bottle's seal before use. The
seal is broken automatically when the bottle is
screwed in.