Volvo S60 Twin Engine 2020, Owner'S Manual

Page: 586 / 687

||
LOADING, STORAGE AND PASSENGER COMPARTMENT
* Option/accessory. 584
CAUTION
When in the loading position, the cargo
compartment cover can obstruct visibility
to the rear. Make sure that the cargo com-
partment cover is fully extended or fully
retracted during driving.
Retracting the cover
1. From the fully opened position:
Lift the cover's handle and pull it rearward
to release the cover's attaching pins from
the grooves. Let the cover retract.
From the partially retracted position:
Grasp the handle and pull the cover out of
the groves to the fully open position. Lift
the handle and pull it rearward to release
the cover's attaching pins from the
grooves. Let the cover retract.
2. Let the cover retract with its attaching
pins above the side panels until it stops in
the fully retracted position.
Related information
•
Installing and removing the cargo com-
partment cover
*
(p. 581)
Installing and removing the steel
cargo grid
*
The steel cargo grid prevents loads or pets in
the cargo compartment from being thrown
forward into the passenger compartment
during hard braking.
For safety reasons, the steel grid must always
be installed and secured correctly.
WARNING
Under no circumstances may a person be
in the cargo compartment when the vehi-
cle is moving. Heavy braking or a collision
could lead to serious injury.
Installation
CAUTION
The steel cargo grid may only be used in
the rear position (behind the rear seat)
described here.
Before installing the steel grid, the existing
plastic ceiling mounting consoles must be
replaced with steel consoles. Volvo recom-
mends that the ceiling consoles are only
replaced by an authorized Volvo workshop or
retailer.
1. Fold down the rear seat backrests.
2. Make sure that the steel grid is facing the
right direction. Lift the grid into the vehicle
through one of the rear doors.