Volvo S60 Twin Engine 2020, Owner'S Manual

Page: 153 / 687

DISPLAYS AND VOICE CONTROL
}}
151
Numbers
Number commands can be given in different
ways depending on the function to be con-
trolled:
•
Phone numbers and zip codes should be
given by stating each number individually,
e.g. "zero, three, one, two, two, four, four,
three" (03122443).
•
Addresses can be given by stating each
number individually or in a group, e.g.
"two, two" or "twenty-two" (22). For Eng-
lish and Dutch language settings, groups
of numbers can also be said in sequence,
e.g. "twenty-two, twenty-two" (22 22).
For English, double or triple digits can also
be used, e.g. "double zero" (00). Numbers
in the range 0-2300 can be used.
•
Frequencies can be given as "ninety-eight
point eight" (98.8), "one hundred four
point two" or "hundred and four point
two" (104.2).
Speech rate and repeat mode
The speed at which the system speaks can be
adjusted.
With repeat mode on, the system will repeat
what you have said.
To change the speech rate or activate/deacti-
vate repeat mode:
1. Tap Settings
in the Top view.
2. Tap System Voice Control and select
settings.
•
Repeat Voice Command
•
Speech Rate
Related information
•
Voice Control (p. 148)
•
Voice control for cellular phones (p. 151)
•
Voice control for radio and media (p. 152)
•
Climate control system voice commands
(p. 205)
•
Voice control settings (p. 153)
Voice control for cellular phones
17
Call a contact in the phone book, have a text
message read aloud or dictate short mes-
sages using voice commands to a Bluetooth-
connected phone.
To access a contact in the phone book, the
voice command must contain the contact
information entered in the phone book. If a
contact, e.g.
Robyn Smith , has several phone
numbers listed in the phone book, a number
category such as
home or cellular can also be
specified, i.e. " Call Robyn Smith cellular ".
Tap and say one of the following com-
mands:
•
" Call [contact] " - call the selected con-
tact from the phone book.
•
" Call [phone number] " - call a phone
number.
•
" Recent calls " - display the list of recent
calls.
•
" Read message " - read a text message
aloud. If there are several messages,
select the message to read aloud.
•
" Message to [contact] " – the user is
prompted to dictate a short message. The
message will then be read aloud and the
user can choose to send or re-dictate the
message. The vehicle must be connected
to the Internet to access this function.