MAINTENANCE AND SERVICE
372
Lamp replacement - cover for main/
dipped beam bulbs
Main/dipped beam bulbs are accessed by
releasing the headlamp's larger cover.
Before starting to replace a bulb, see Lamp
replacement - headlamps (p. 371).
1. Unscrew the cover's four screws using a Torx
tool, size T20 (1). They should not be loos-
ened completely. (3 - 4 turns are sufficient.)
2. Slide the cover to one side.
3. Remove the cover.
Reinstall the cover in reverse order.
Related information
•
Lamp replacement - headlamps (p. 371)
•
Lamp replacement - dipped beam (p. 372)
•
Lamp replacement - main beam (p. 373)
•
Lamp replacement - extra main beam
(p. 374)
Lamp replacement - dipped beam
The dipped beam bulb is fitted inside the head-
lamp's larger cover.
Applies to cars with halogen headlamps.
1. Detach the headlamp (p. 371).
3. Unplug the connector from the bulb.
4. Detach the bulb by pulling it straight out.
5. The guide pin on the lamp should be straight
up when it is fitted and a clicking sound
should be heard when it clicks into place.
Reinstall the parts in reverse order.
Summary of Contents for S 60
