Volvo S 60, Owner'S Manual

Page: 117 / 452

INSTRUMENTS AND CONTROLS
}}
* Option/accessory, for more information, see Introduction. 115
Trip computer heading in combined instrument panel Information
Distance to empty For more information - see the section "Range - distance to empty tank" (p. 112).
Fuel consumption Current consumption.
Average speed
•
Long press on RESET resets Average speed .
No trip computer information. This option shows a blank display and it also indicates the beginning/end of the loop.
Resetting the trip computer
1. Turn the thumbwheel and stop at the trip
computer heading to be reset: T1 and total
dist. , T2 and total dist. or Average speed .
2. One long press on RESET resets the value
for the selected heading.
Each heading must be zeroed individually.
Functions in the combined instrument
panel's menu
The combined instrument panel's menu includes
setting options for trip computer. Open the menu
to check/adjust the functions in the table below.
1. To ensure that no control is in the middle of
a sequence - reset them first with
two presses on
RESET .
2. Press OK .
3. Browse through the functions with the
thumbwheel and select/confirm with OK .
4. Finish by pressing twice on RESET after
completed checking/adjustment.
Functions Information
Digital speed
•
km/h
•
mph
•
No display
Shows the car's speed digitally in the centre of the combined instrument panel.
Parking heater
*
•
DIRECT START
•
- Timer 1 - leads to the menu for selecting time.
•
- Timer 2 - leads to the menu for selecting time.
For a description of programming the timer, see Engine block heater and passenger com-
partment heater
*
- timer (p. 138).