||
MAINTENANCE AND SERVICE
368
Filling
The fluid reservoir is located on the driver's side.
The fluid reservoir is protected under the cover
over the cold zone in the engine compartment.
The round cover must be removed first before the
reservoir cap can be reached.
Turn and open the cover located on the cov-
ering.
Unscrew the reservoir cap and fill the fluid.
The level must be between the
MIN
and
MAX
marks, which are located on the inside
of the reservoir.
Do not forget to refit the cap.
Power steering fluid - level
Cars with 4-cyl. engine do not have power steer-
ing fluid. For cars with another engine, the level
of the power steering fluid must be between the
reservoir's
MIN
and
MAX
marks. The fluid does
not need to be changed.
Keep the area around the power steering
fluid reservoir clean when checking. The cover
must not be opened.
Check the level frequently. The fluid does not
require changing. The level must be between the
MIN
and
MAX
marks.
For recommended fluid grade, see Power steer-
ing fluid - grade (p. 425).
WARNING
If there is a fault in the power steering system
or if the engine is switched off and the car
has to be towed, the steering is much heavier
Summary of Contents for S 60
