Volvo 850 Manual Download Page 128

Page: 128 / 147

Drive belt for alternator, power steering and air conditioning

Coolant

If you replace the coolant yourself, ensure

that the used coolant is disposed of in an

environmentally safe way. Ask your Volvo

workshop for assistance.

Automatic belt tensioner

The drive belts have an automatic belt tension-

er. Belt tension neither can nor should be ad-

justed. Do not attempt to check the belts your-

self, they will be checked in connection with

workshop service.

Leave belt replacement to the

Volvo dealer

Owing to the location of the belts it may be

difficult for you to replace them. It is advis-

able to let your Volvo dealer do this work.

Genuine Volvo drive belts must always be

used.

Power steering

Pump

Alternator

Air conditioning
compressor

Crankshaft

Summary of Contents for 850




















































































































































Search results

Summary of Contents for 850

Reviews:

Related manuals for 850

Brands by name

Popular brands

Volvo 850, Manual

Search results

Summary of Contents for 850

Reviews:

Related manuals for 850

Brands by name

Popular brands