Changing wheels
Stand next to car
Undo the wheel bolts
Loosen the wheel bolts 1/2-1 turn with the socket spanner.
The bolts are loosened by rotating the tool anti-clockwise.
There is a jack attachment located in the middle on each side of
the car. Pull out the handle and press it down to release
the crank. Position the jack on the stud in the jack attachment
as shown in the diagram.
NB! Crank the jack base down until it lies flat against the
ground. Check once again that the jack is inserted into the
attachment point as in the diagram and that the base plate
is horizontal under the attachment.
Jack up the car until the wheels are clear of the ground.
Remove the wheel bolts and lift off the wheel. Take care not to
damage the threads on the wheel bolts.
