Child Restraint Anchorages (Australia)
WARNING!
Child Restraint Anchorages are designed
to withstand only those loads imposed by
correctly fitted Child Restraints. Under no
circumstances are they to be used for adult
seat belts, harnesses or for attaching other
items or equipment to the vehicle.
Child Restraint Anchorages
To comply with Australian requirements all
Volvo cars in the market are fitted with Child
Restraint Upper Anchorages for the rear seat.
The reason for this legislation is to provide
upper anchorages for the attachment of Child
Restraints and facilitate the transfer of Child
Restraints from one car to another, since they
would have similar upper restraint anchora-
ges fitted as standard.
The three anchorages are located on the parcel
shelf and on the rear side of the backrest.
Remove the plug covering the anchorage
point you want to use.
2:14
This can be done with a suitable coin. The
plug is removed anti-clockwise. The centre
anchor fitting is pre-fitted at the factory
(certain models).
Refer to the manufacturers' instructions for
securing your child seat.
The anchor fitting to be installed has to be
of the type shown in the diagrams above.
For correct installation: Note the correct
fittings and dimension in the diagrams. It is
important to use only the recommended bolt
and spacer.
