30
IMG-332920
Carefully pry off the panel at the lower edge and remove it. Place
to one side. A new one can be found in the kit.
31A
IMG-331989
31B
IMG-331990
Illustrations A and B
Take a new panel, front intake cable with washer and nut from
the kit.
Insert the cable and ground lead through to the engine heater.
Ensure the connector is turned so that the cover's sides are
parallel with the plates in the panel and that the cover opens
from the panel's left-hand side (Image B).
Tighten the connector.
Note!
The washer must be positioned as illustrated.
Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
© Volvo Car Corporation
Electric engine heater, 230 V, 5-cyl. diesel- 30756865 - V1.2
Page 18 / 32
