50
J2900292
Connect the short cable from the kit to the engine block heater, to
the routed cable (1) from the front socket. (When fitting junction
connector/timer relay at the same time, the cable from the front
socket is connected to the single outlet on the junction
connector/timer relay instead. Refer to the installation
instructions for passenger compartment socket/timer relay).
Firmly press the cable junction together.
51
J2900293
Press a locking sleeve (from the kit) over the cable splice.
52
J2900294
Take a double tie strap from the kit. Install the double tie strap
around the stay and the cable splice. Ensure that the splice is
secured in the centre of the strut. Tighten the double clamp
properly.
Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
© Volvo Car Corporation
Electric engine heater, 230 V, 5-cyl. diesel- 30756865 - V1.2
Page 26 / 32
