10
IMG-265778
Using a sharp knife, first make a thin cut along the edges of the
new marking inside of the bumper cover. Then carefully cut out
the bumper cover hole.
Cut off the upper dotted section of the template and finish the
new marking all the way around.
Install the protective cover for the front engine block heater
socket from the kit. Check that it aligns. Adjust the hole using a
knife or file as necessary.
Smooth off the hole edges. Remove any swarf.
Warning!
Cut carefully. It is easy to slip with the knife and move outside
the markings.
11
IMG-265779
Take the protective cover from the kit and press it into the hole
cut in the bumper cover.
Take the cable for the front engine block heater socket with
ground lead from the kit and thread them through the protective
cover.
Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
© Volvo Car Corporation
Electric engine heater, 230 V, 5-cyl. diesel- 30756865 - V1.2
Page 10 / 32
