15
IMG-332914
Find the template for C70 MY 2010 in the installation instructions.
Cut it out following the dotted lines.
16
IMG-332916
Position the templates following the curves of the surface
between the lower grille and panel for the fog lamps and tape it
according to the image.
Take a sharp knife. First make a thin cut along the edges of the
inside of the template. This provides a groove to follow. Then cut
carefully out of the bumper cover.
Remove the template.
Install the protective cover for the front engine block heater
socket from the kit. Check that it aligns. Adjust the hole using a
knife or file as necessary.
Smooth off the hole edges. Remove any swarf.
Warning!
Cut carefully. It is easy to slip with the knife and move outside
the template.
Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
© Volvo Car Corporation
Electric engine heater, 230 V, 5-cyl. diesel- 30756865 - V1.2
Page 12 / 32
