Volvo 2016 XC 90 Twin Engine, Owner'S Manual

Page: 212 / 582

||
LOADING AND STORAGE
* Option/accessory, for more information, see Introduction. 210
5. Attach the mounting bracket's hook through
the cargo anchoring eyelet near the floor of
the cargo compartment and insert the threa-
ded section of the bracket through the grid's
lower attachment hole (1).
6. Slide the plastic sleeve onto the threaded
section of the of the mounting bracket with
the sleeve's flange turned upward and press
it down through the hole. Screw the screw
cover into place until its underside is approx.
0.2 in. (5 mm) from the grid (2).
7. Repeat steps 5 and 6 for the opposite side.
8. Center the grid and tighten both mounting
brackets alternately until the grid is held
securely in place.
Removing
Perform the steps above in reverse order. The
hooks can be removed before the plastic sleeves
are removed from the holes in the grid.
Related information
•
Cargo net (p. 207)
•
Cargo compartment cover
*
(p. 211)
•
Load anchoring eyelets (p. 210)
•
Loading (p. 205)
Load anchoring eyelets
The eyelets in the cargo compartment can be
folded out to secure objects with straps, a net,
etc.
Load anchoring eyelets
WARNING
•
Cover sharp edges on long loads to help
prevent injury to occupants. Secure the
load to help prevent shifting during sud-
den stops.
•
Always secure large and heavy objects
with a seat belt or cargo retaining straps.
•
Always secure the load to help prevent it
from moving in the event of sudden stops.
•
Switch off the engine, apply the parking
brake and put the gear selector in
P
when loading and unloading the vehicle.