Volvo 2015 XC60, Owner'S Manual

Page: 89 / 430

03 Instruments and controls
03
}}
*
Option/accessory, for more information, see Introduction.
87
Light switches
The headlamp control activates and adjusts
the external lighting. It is also used to adjust
display and instrument lighting and mood
lighting (p. 96).
Overview, light switches
Overview, light switches.
Thumbwheel for adjusting display and
instrument lighting as well as ambient
lighting*
Button for rear fog lamp
Knob for daytime running lights and park-
ing lamps
Thumbwheel
17 for headlamp levelling
Knob positions
NOTE
The same lamps are used for daytime run-
ning lights and position/parking lamps
front. The brightness is higher when the
lamps are used as daytime running lights.
Posi-
tion
Specification
Daytime running lights A when
the car's electrical system is in
key position
II
or the engine is
running.
Main beam flash can be used.
Daytime running lights, side
marker lamps front and posi-
tion/parking lamps/side marker
lamps rear when the car's elec-
trical system is in key position
II
or the engine is running.
Position/parking lamps/side
marker lamps when the car is
parked.
Main beam flash can be used.
Posi-
tion
Specification
Daytime running lights, side
marker lamps front and posi-
tion/parking lamps/side marker
lamps rear in daylight when the
car's electrical system is in key
position II or the engine is run-
ning.
Dipped beam and position/
parking lamps/side marker
lamps in weak daylight or dark-
ness, or when the rear fog lamp
or windscreen wipers with con-
tinuous wiping are activated.
The tunnel detection (p. 90)*
function is activated.
The active high beam (p. 91)*
function can be used.
Main beam can be activated
when dipped beam is switched
on.
Main beam flash can be used.
Dipped beam and position/
parking lamps/side marker
lamps.
Main beam can be activated.
17 Not available for cars equipped with active Xenon headlamps*.